Re: How do you install a belly pump on a Farmall H

Posted by GeneMO on February 01, 2007 at 09:32:47 from (71.0.216.169):

In Reply to: Re: How do you install a belly pump on a Farmall H posted by neblinc on January 30, 2007 at 08:37:08:

I think I saw this in an IT manual. But you can make a T handle out of rod. Then you weld another short piece of rod onto the side of the long rod. The idea is to make these T handles to fit in the holes at the bottom of the pump. The little piece of rod slips in the wide spot to keep the pump from rolling. Two people, with these T handles lift the pump in place. It would dangned near take a 3rd person to put the bolts in. I dont like this method. Too many people needed, but this is what the manual shows so I thought I would mention it. Go with the treaded rods.

Gene

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]