Re: Super M Gas flow problem

Posted by Bob M on February 01, 2007 at 10:32:15 from (151.190.254.108):

In Reply to: Super M Gas flow problem posted by AOOC on February 01, 2007 at 08:55:00:

Most likely the strainer in the carb fuel inlet is partially plugged. Or possibly the carb float is hanging up.

Remove the drain plug at the bottom of the carb bowl. Then open the shutoff at the sediment bulb. A good working carburetor will flow a solid, continuous stream of gas out of the bowl drain.

But if gas just dribbles out of the drain, remove and clean the inlet screen (it's behind the fuel line inlet fitting).

If the inlet screen is OK, drop the carb float bowl and be looking for a sticky float or junk caught in the float valve.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]