Re: Ring Compressor

Posted by T_Bone on February 03, 2007 at 06:19:42 from (4.240.42.91):

In Reply to: Re: Ring Compressor posted by CNKS on February 02, 2007 at 13:48:53:

Hi CNKS,

The last AL piston I did I had to crank down on the compressor real tight then I made a wood disc 1/4" smaller than the bore and used the disc to push on the top of the piston. Even with lots of oil, the piston went in tight but sliped right in as soon as the compressor was tight enough.

I read the instructions to mean 180º from the pin.

I too am just a shade tree mechanic so better advice might be well taken.

T_Bone

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]