Hydraulic Oil Strainer

Posted by Skycarp on February 04, 2007 at 09:36:03 from (12.176.204.25):

When I removed the hydraulic oil strainer from the SC cylinder
block, it was partically collapsed but otherwise in good shape. It
appears the previous owner missed the oil port on the opposite
side of the block and just collapsed it when tightning up the cap
screws. I see there is a coil spring inside of the wire mesh that
should press the port strainer into the oil port.

Now, when I reinsert it, the intake port for the strainer doesn't
reach the port where oil comes in from the pump. Short of
buying another one, are there any tricks to stretching it back to
its original shape so it will fit into the port?

Thanks in advance.

Replies:

• Re: Hydraulic Oil Strainer Janicholson 13:39:32 02/04/07 (4)
  • Re: Hydraulic Oil Strainer JayWalt 16:54:51 02/04/07 (3)
    • Re: Hydraulic Oil Strainer Janicholson 17:06:41 02/04/07 (2)
      • Re: Hydraulic Oil Strainer JayWalt 17:50:58 02/04/07 (1)
        • Re: Hydraulic Oil Strainer Janicholson 19:24:41 02/04/07 (0)
• Re: Hydraulic Oil Strainer Dave BN 09:43:45 02/04/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]