Re: Hydraulic system heater

Posted by JayWalt on February 08, 2007 at 12:48:45 from (70.226.20.153):

In Reply to: Re: Hydraulic system heater posted by RustyFarmall on February 08, 2007 at 12:36:24:

didnt know it was a whole hydraulic outfit with the tranny being the resevoir. dont those things hold over 10 gallons of oil? even with a 1500 watt immersion heater, you are looking at multile hours to heat it at all. Then consider the tranny case needs to be heated too cause it will absorb alot of the heat. This is nearly impracticle with a standard tye heater. now tap a hole in the case and get a special plug for a 220 5000 watt water heater element might work, but man, its just not worth it or make much sense...

As nat said, fix the problem, not make more for yourself..

Replies:

• Re: Hydraulic system heater IH2444 13:13:02 02/08/07 (1)
  • Re: Hydraulic system heater JayWalt 13:22:53 02/08/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]