Re: Cylinder Sleeves

Posted by gene bender on February 14, 2007 at 14:02:06 from (67.55.226.214):

In Reply to: Re: Cylinder Sleeves posted by Dave from Texas on February 14, 2007 at 12:50:03:

I would take the crank to a machine shop and let them clean the rust as mosr have a small lathe for polishing. You should be able to rent a small sleeve puller sometimes the sleeve can be stuck pretty good. If the sleeves are junk stuck ones will come out easier by welding a bead on the inside this will heat it enough to pull out better.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]