Re: Moving the blade

Posted by Hugh MacKay on February 17, 2007 at 03:11:00 from (216.208.58.154):

In Reply to: Moving the blade posted by Vern on February 16, 2007 at 21:13:31:

Vern: Are you sure you move the drawbar for this? I must admit I've never had a blade in center, nor have I given them a lot of attention. I say this as I have seen a couple of these and the drawbar was still on back as a drawbar. In fact I did use one such drawbar as a seat once at a show, and I do remember it having the center blade.

I know there were two kits that came with these blades; one for center mount and the other for front mount. I always thought the center mount kit was a cross member that bolted between final drives on the front side, and the blade push beams were hinged to that. I have some photos of this somewhere, however someone will probably have a definate answer before I can find them.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]