Re: SA Oil pan leak

Posted by TWheat on July 02, 2007 at 05:15:46 from (172.145.219.168):

In Reply to: SA Oil pan leak posted by TWheat on July 01, 2007 at 17:34:42:

Thanks again , I'll try the 3/8 fine tap/3/8 coarse capscrew first, if that doesn't hold, I'll go to 7/16,just don't like one odd size . I've got another front assembly, but it does'nt look much better than the one in there, also not sure about getting the old one out and the replacement back in.
Good idea on the magnet

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]