Re: 656 Throttle Adjustment

Posted by Owen Aaland on July 12, 2007 at 12:18:20 from (65.165.246.40):

In Reply to: 656 Throttle Adjustment posted by Formerly PaMike on July 12, 2007 at 09:26:21:

It is designed to always hit the stop. The throttle lever at the pump is attached to the throttle shaft with a spring assembly. You should adjust the throttle linkage so that at full throttle it moves the lever on the pump just a bit beyond the point where the high speed stop screw stops the shaft from moving any farther. The spring will then hold the throttle shaft in the high idle position.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]