Re: farmall 6 volt starter

Posted by JT on July 19, 2007 at 06:17:55 from (70.226.192.188):

In Reply to: farmall 6 volt starter posted by michael geer on July 19, 2007 at 05:47:42:

When you replaced he brushes, did you make sure the springs were not weak? Did you clean the commutator and clean the mica from between the lands on the commutator? If you did all this, as the other said, make sure you have good heavy cables, a 6 volt batery does not put out a lot of amps, so any excessive resistance from small cables or a bad connection will do what yours is doing. On the new battery, did you charge it? An off the shelf battery normally only has a surface charge, and are not real fast sellers, so if they sit on the shelf for a while, they might loose charge. But normally connections, or too small cable are the culprit.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]