Re: IH 340 utility hydraulics

Posted by Doug Warner on July 25, 2007 at 10:17:24 from (205.188.117.137):

In Reply to: IH 340 utility hydraulics posted by Doug Warner on July 24, 2007 at 18:14:37:

Hi guys. The pictures help JJ. I can't figure out how to add pictures in here myself. ???

As far as what is "pinned" in position, I am referring to the ends of the control spools located on the valve. I don't know if these are supposed to be locked into the positions that they are. If I could add a picture myself, I could show you what mine looks like. I have 3 and the outer two are "pinned" out like in your picture JJ, but the middle one is all the way in.

But like I said before, my main concern is that the hydraulic lines are getting so hot and the tractor acts like it is under a load until you actually use one of the attachments. This I need to remedy. Tractors are not my specialty. I know about everything else under the sun (cars, bikes, etc) but this is out of my comfort zone.

Your help is greatly welcomed and appreciated.

If you would like to call me, Mo, (or JJ too for that matter) feel free. My home phone is 616-897-3133. If direct email is better, you can do that too.... redarrowpride@aol.com
Thanks so much!!!!

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]