Re: Farmall 100 12 volt question

Posted by Hobo,NC on July 27, 2007 at 15:43:26 from (71.29.34.207):

In Reply to: Farmall 100 12 volt question posted by Jrry on July 27, 2007 at 05:56:05:

going to give ya something to think about then going to look for a pix of mine. the first GM 10SI i installed on my 100 I used the original gen pulley and still run it. I put the top hole that is used for the adjustment to the bottom original base and the big 3/8" base to the top on the adjustment bracket and it all aligned up, no modifications. I ran it that way over 10 years till I rebuilt the engine and made a nicer set up, will look for a pix of the way i have it now.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]