Re: Generator on 1951 C Farmall

Posted by ScottyHOMEy on August 02, 2007 at 20:26:34 from (70.105.246.111):

In Reply to: Generator on 1951 C Farmall posted by Greg2007 on August 02, 2007 at 19:36:02:

The armature post should be the one furthest away from the crankcase. Al lot of them have an "A" (it might look like an inverted "V") stamped next to them. The post closer to the crankcase will be the field.

To polarize (assuming you have a four-post regulator that mounts below the generator) get a jumper wire. Clip one end to the BAT termial on your regulator. Turn your ignition on, leave tractor off. All you have to do is touch the ither end of the jumper to the GEN termial on the regulator. It should give you a little spark. If it does, you're done.

Replies:

• Re: Generator on 1951 C Farmall teddy52food 06:30:59 08/03/07 (1)
  • Re: Generator on 1951 C Farmall ScottyHOMEy 08:39:02 08/03/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]