Re: Farmall A belly mower shoots to the front

Posted by Janicholson on August 05, 2007 at 06:48:37 from (71.87.39.51):

In Reply to: Re: Farmall A belly mower shoots to the front posted by prawnfarmer on August 04, 2007 at 05:01:18:

The the front edge of the shroud (the part dragging into the grass as the unit moves into unmowed lawn) should be about 1/2 inch below the cutting edge. this keeps material from spitting out, as well as providing a better air flow out the discharge. If the blades are flat, replacing them with blades that have a flip up at the rear edge will also help air flow. If the homemade deck is all square material, I would weld in some 1/8" sheet to make the primary blade zone fit the blades. The front should be about 1/4th inch lower than the back. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]