Hi Karl, the 2400 is the industrial version of the ag 454. Last fall my brother and I took the CIH 2250 loader off of his 495 (newer version of 454) and put it on his 3230 (newer version of 464). The difference in the two tractors is the length between the mounting holes on the torque tube to the mounting holes up by the front axle. The difference is about 8 inches because the 495 is a D179 3 cyl Diesel and 3230 is a D206 4 cyl Diesel engine. His 2250 loader frame had the 2 different set of holes predrilled in it except someone forgot to drill one of the holes at the front and we had to drill a new hole.
So measure the distance between the mounting holes on your 464 and then check the loader on the 2400 to see if it has 2 sets of holes and compare the distance between the holes in the loader. Now the 2400 maybe a 4 cyl gas engine and measurement differences could be less than 8 inches.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
