Posted by Hugh MacKay on November 03, 2007 at 15:04:24 from (209.226.106.123):
In Reply to: #s from my 340 posted by trailwart on November 03, 2007 at 12:34:04:
Those numbers you have ending in R1, R2, R3, etc are part numbers. Any IH number that ends in Rxx is a part number, and they are cast in place digets.
You serial number plate should be on the left side of clutch housing, little metal tag, rivited on the casting.
If your serial tag is missing, go to casting date codes. Every major casting has one, and they are also cast in place, about 3/8" high digets, day and month by number and year by letter. Between each of day month and year you'll find what looks like a round head, blade type screw cast in place. The letter reference are; A-1955, B-1956, C-1957, D-1958, etc. Castings were usually cast, one to four months before tractor was built.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Earthmaster - by Staff. This tractor, manufactured by the Earthmaster Farm Equipment company in Burbank, California was made for only two years. The Model C came out in 1948 and was followed by the "CN" (narrow-width model), "CNH (narrow-width high-crop model), "CH" (high-crop), "D" and the "DH" (high-crop) in 1949. The main difference between the models was tire size, tractor width and cultivating height. The "D" series were about 20 inches wider overall than the
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
