Posted by ste_fano on December 04, 2007 at 12:16:15 from (207.63.165.10):
In Reply to: B trans noise posted by ste_fano on December 04, 2007 at 06:06:41:
Well, I bought a B with a belly mower a few years ago. I dont use the mower. I mounted a 42 inch snow blade at an angle right in front of the driver, onto the mower front that is angled. One hole on the left of the blade mounts flush to the front of the mower. The mower has too much on an angle farther down, so the other hole on the blade has about a 10 inch bolt, which I then cut about 6 inches of 3 dia PVC to get the right angle on the blade. The bolt goes from the blade, through the PVC, then is mounted to mower. I can see clearly what I plough. I had the arm killer hoist last year, so rigged a electric winch with a pulley this year.The system works, and hasnt bent the mower at all.I plough my driveway, and an old WW2 Navy vet who has a bad shoulder. I will send a pic if I can.Steve
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
