Posted by Hugh MacKay on January 13, 2008 at 05:29:42 from (209.226.247.47):
In Reply to: Somebody stop me posted by rnicholas on January 12, 2008 at 17:24:17:
rnicholas: There are three trains of thought on this issue, do as you have done. Then you could have built the shop large enough for A, B, BN, SA, SA1, 100, 130 and 140. Probably 2 - 140s as you need both type grills. Then you must figure on at least one high clear. Well, I mean, I just need to complicate things.
Second thoughts, maybe you should stick with your option, go one step at a time. Heaven help us if you turned out a B with a 140 grill, or tried to bolt a touch control unit to an A torque tube. LOL Best use your own judgement, in years gone by, I've had my Super A and 130 apart in same shop at the same time. I notice now, I have 130 tyrods on my SA and vice versa. I could change them, however the tyrod removal fork would destroy the new rubber dirt shields I put on back then.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
