Posted by CNKS on January 22, 2008 at 05:31:27 from (216.144.104.128):
In Reply to: IH disc plow posted by DannyTN on January 21, 2008 at 18:36:02:
If it came off an A,B,or C it is not the disk plow that is equivalent to the more common moldboard. It is what is called a "tiller" or a "one way", takes less draft and has a wider cut than the usual plow. But, I have never seen one. And, I don't think IH ever made a true semi-mounted plow (moldboard equivalent) (in the late 40's early 50's) with more than 3 disks, that being the H/M 150. I am not talking about the plows that appeared in the late 50's etc. And if it fit a B, it will have to be modified to fit a C, the mounting points are completely different. I assume you mean semi-mount and not trailing, if you mean trailing, all bets are off.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
