Posted by dave2 on April 17, 2008 at 04:38:28 from (84.170.162.197):
In Reply to: Spark Plug Tap posted by Loren in Iowa on April 16, 2008 at 20:16:35:
Loren in Iowa said: (quoted from post at 20:16:35 04/16/08) A little oil seeps past the spark plug threads, on our Farmall Regular. I'm thinking I should clean out the threads with a tap. Are they pipe thread? What size?
first thing we did in auto shop was made SP thread chasers to clean the threads. Took used plugs, ground the little flange that holds the porzelain in place to remove it, ground off the electrode, and took a hacksaw and made two cuts (cross) through the threads. Will clean them without being tough enough to screw anything up.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Cletrac General GG and the BF Avery A - A Bit of History - by Mike Ballash. This article is a summary of what I have gathered up from various sources on the Gletrac General GG and the B. F. Avery model A tractors. I am quite sure that most of it is accurate. The General GG was made by the Cleveland Tractor Company (Cletrac) of Cleveland, Ohio. Originally the company was called the Cleveland Motor Plow Company which began in 1912, then the Cleveland Tractor Company (1917) and finally Cletrac.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
