|
Farmall & IHC Tractors Discussion Board |
Farmall Cub Misfiring
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by Ed E on March 08, 2000 at 19:39:51 from (209.240.200.184):
Sometime ago I put a message on here concerning correct timing of this cub with a magneto. Thanks to all who responded. Further investigation showed the magneto was shorting out. I got the magneto back from the mag shop and when I installed it and set the timing the tractor started without problems; however, the number 2 cylinder is not firing. I have checked the spark plug wire and have checked the plug. I even put the plug in the wire and grounded it to the engine and I get a good spark but when the wire is hooked to the plug in the engine it does not fire. This engine has been recently overhauled and I believe there is a compression problem either with the valves or possibly a scored piston or broken or improperly installed rings. I would appreciate any information anyone would like to share concerning this problem.
Thanks for your help,
Ed E
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
