|
Farmall & IHC Tractors Discussion Board |
Update; Super M Stuck Really Hard
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by Tim Ham on March 10, 2000 at 08:49:30 from (198.105.65.90):
Just thought I would give you guys an update that offered advice on my super M with the stuck engine. We have pretty much got everything moving to some extent but the pistons. My dad feels the # 3 cylinder is the culprit since that exhaust valve is open. We have noticed that the PB Blaster and other lubricants we have put in all the cylinders has slowly seeped down except for the # 3 which seems to be slower but some is getting through. We have jacked the right rear wheel up and use this to gently rock it back and forth and have noticed the fan has started to have some movement. Anyway at this point in time I have a good opportunity to be very patient with it. My dad checks it every day. I have two Boys playing ball(I coach both teams) and I have a remodeling job going on my house. So for now patience isn't just a virtue, it's a necessity. I'll Keep you guys posted, thanks for listening, Tim Ham
Follow Ups:
Home
| Forums
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
