Thank you QR. The filters you are mentioning confuse me. My filters are two replaceable canister elements in a reusable housing with a screen (374990R91) or (375085R91) for just the tandem elements. This was used until S#10807 (mine is S#3712) then it went to a one piece filter (388084R92)with a "mushroom" relief valve (386121R92). These are all under the 12 GPM breakdown.
Using the screen assembly with the tandem filters, I do not see how a longer filter will fit in the filter housing. I understand if I used something like the one piece (388084R92) style, a cover plate spacer is required due to longer length.
I have the TC-88 parts manual for the 504 and I have not found the filters I need. QR, do you happen to know the IH part number for the required filter, filters, or filter assemblies that will retrofit my F504D? I have machine shop access, a spacer is the least of my worries.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.