Re: Question for Rusty Farmall

Posted by No tools on July 23, 2008 at 12:54:49 from (71.79.47.23):

In Reply to: Question for Rusty Farmall posted by Mike Farmer on July 23, 2008 at 11:04:17:

Here's the deal.
Farmall M cranks from 501 through will interchange clear through the 450.

Deal is 3 different size bearings.Farmall M 501 up to somewhere around 288.000,UNless x11 code on serial number all had same bearings,X11 on sn crank undersize from factory.

Now somewhere around 288.000 all late M,the SM,400,450 i believe use the same bearings.

So there you go the (MAIN) concern i have is knowing what engine/serial N/suffix code it come from.All cranks interchange but knowing what bearing to use.Hope this make since to you.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]