Posted by the tractor vet on August 23, 2008 at 19:41:46 from (75.19.120.126):
In Reply to: Re: M govenor posted by Bernie Steffen on August 23, 2008 at 07:04:24:
YEs there were hardened bushing in the holes and most have fallen out over the years . SOOOOoooo what i have been doing is making up Bronze bushing and pressing them in with a .003 interferance fit . Both side of each bushing must be champhered and have just enough clearance so you have no spring bind. One of my old customers and good friend is a clock maker and has all the neat small tooling in his basement to make them up . This all stared one day when he was behind on field work and asked if i could help him work ground , he farms about 165 acres with a S/MTA a WD 45 Allis and a 8 N ford all bought new on this farm . Now a week before i had may S/MTA over helping him plow as i was trying o clean up several sets of model 60 plows that i picked up at a sale and wanted to get them looking good before i put them up for sale . Well i was disking with his S/MTA pulling a 10 foot disc and it was real slugish . Not much gov. action . Well forgive me but things must work wright with me and i stopped and had to open up the gov.and found what was wrong and tore into it and stopped all operations , Told Billy that this was the problem and we went down into his basement and in less then a hour had everything made and installed did the carb to gov. scyn opened up the fuel a turn and half checked the timing and set it and put the tractor back in the field and instead of struging up and down the humps and bump in third it was now doing it in forth . Made a new tractor out of it . When he put it on the grinder mixer she did not die while grinding ear corn . He told me that it had never ran that good in all the years that he has had it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
