Posted by John2009 on December 05, 2008 at 00:38:17 from (72.69.148.47):
I took of my oil pan to clean out the sludge but all the bolts were the same length. Arent 4 of them suspose to be longer? I thought I remember reading that the 2 in front and 2 in back were suspose to be slightly longer. I tried to search but all I found was a thread about an H.
Does anybody know what length the longer ones are suspose to be?
I assume all the bolts get a lock washer? A couple seemed to have them but most appeared missing although they could be under the scum somewhere.
What do I torque the bolts to? Again I searched but all I found was a H thread and they said 33 foot pounds, I just want to make sure that sounds right.
Anything else I should be looking at while I am in there? Oil pump screen is spotless and it has good pressure so I believe that is all good.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
