Posted by Baelee05 on December 07, 2008 at 18:52:59 from (66.82.162.18):
In Reply to: 44 H #1 piston posted by Jarhead on December 07, 2008 at 06:34:05:
Well if I'm seeing things correctly it seems that you have a hole in your block. Do yourself a favor and find a used block. They made about a zillion H's so a good used block should be pretty easy to come by. If you try and cobble it together with JB Weld or some other cure all you are always going to be wondering if it is going to fail. You have to tear it down to do your overhaul anyway so why not get a good block and put it together the right way. I know it might save you some money now, but I've learned over the years that sometimes cheap fixes can be pretty expensive. Kind of like cheap seed corn. You feel pretty smart when you plant and then you feel like an idiot when you harvest it. Good luck.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
