Posted by P and R Pete on December 30, 2008 at 21:50:28 from (207.7.182.158):
In Reply to: Hydraulic Repair Kit posted by jc newton on December 30, 2008 at 16:28:06:
Couv, I recognize those pics!
I have a copy of the instructions that came with the seal/gasket set. They aren't much, and have no info that isn't contained in the Serviceman's Handbook GSS-1054 that I got from binderbooks. The GSS-1024 has an exploded view of the hydraulic block, tha same one that is in the I&T shop manual, but on neither is there an item labeled "Pressure Control Bushing" so I'm not exactly sure to what piece you're referring, but on mine, ('49 Super-A) there was no bushing held in place by any set screw.
I'll be glad to post, e-mail, or fax, so let me know. I took a lot of pictures when I overhauled mine.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
