Posted by AndrewFromNS on January 08, 2009 at 07:24:30 from (71.7.194.23):
In Reply to: fasthitch cat 1 to 2 ? posted by glennster on January 08, 2009 at 05:47:40:
Just a quick comment. This may or may not have any bearing...
I've got the 2pt-3pt factory adapter for a 300 or larger (its got the big points)...I've got a Super-C with the small points. TractorSam and I made some new points to put onto the adapter, and at least according to the measurements made off my small-point drawbar, the big points are 1/4" wider than the narrow points, and the overall span between the large points is 1/2" larger, outside to outside, than the small-point.
Like I said, I don't know if this has any bearing on reality or not, as I've never seen my adapter used in a 300...it may not actually fit, making my measurements and the point I'm trying to make above nul and void. However, I just figured I'd throw that out there, just in case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tuning Up Your Tractor: Cooling and Fuel Systems, Hoses and Belts - by Curtis Von Fange. Our tractor is coming right along. The old oil and filter has been taken to the recycler and the air filter replacement has breathed new life into our motor. Let's take a closer look, now, at the cooling system since it has to work so hard in the summer heat. Cooling systems can be real cantankerous in their old age. Radiator cores clog up with rust, lime or other mineral deposits and the fins clog up with weed seeds and debris. The metal headers slowly corrode away from years of use and
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
