Posted by Janicholson on January 27, 2009 at 19:25:51 from (68.112.156.69):
In Reply to: Increasing Horsepower posted by IHRedRules on January 27, 2009 at 19:02:52:
This make it as you want. Put in thin sleeves making it 350s displacement. Put high altitude (8000 ft) high dome pistons in it. Put the intake and heads and exhaust from a 350. Put on an M carb. Put an electronic ignition in the distributor. Put the cam from a 350, or a competition ground cam from puller suppliers. Shave .080" off of the head. Use high ratio rockers (puller suppliers) and now you must use premium fuel. Advance the spark until it just barely starts spark knock then back off till it stops.
These could net you 20HP, but none are cost free. Some can be seen, all take money, some reduce reliability. Have fun, parts can be obtained from many places. Do not port and polish, do not run w/o an air cleaner. JimN
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
