First of all the pressure pot is a #40 HF unit. It needed improvements and i used 3/8" nipples, tees, and 45's to remake the sand feed. This helps a lot.
KENB_TEXAS, I made a Farmall Scaffolding Update with more pics. I got the box off the ground with a bottle jack and a little time. An 8'x40' weighs 9000 lbs empty! I have it setting on concrete house piers. They (intermodal container people) recommend that they are set 8" or more off the ground to promote air flow underneath to prevent floor rot (17 ply 1 1/4" marine plywood).
I like free standing structures. I have built several porches on my rent trailers and this shed as free standing units. One day I may want to move them. I plan to make some angle iron braces to tie the shed to the container for increased strength. Not that it is weak now but to handle the possible hurricane winds this fall.
The shed is 24'x32' built of 4"x6"x16' treated post and 2"x6" purlins and 6" reciever channel with 29 gauge ag panel galvalume roofing.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
