Yep, some are easy and others take some work and time. This is a bolster from a parts 400. I didn't need to disassemble the hand crank mechanism but I wanted to see if the barrel part could be pushed back to provide clearance for the installation of an additional crankshaft pulley on another 400. Ya, I could have used a torch on the other tractor but I don't like making irreparable alterations. This took a couple of days and maybe ten applications of PB Blaster. I also gave it some good vibrations with a needle scaler and hammer. It would have been very difficult had the bolster been attached to a tractor
This is the other 400. It wasn't stuck and came apart fairly easily. Everything is back together, The bolts on the pulley bushing actually engage the points on the hand crank barrel. And it's kinda nice that the pulley bushing is even with the end of the crankshaft. It looks like it might have been factory designed.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
