Posted by ryanwheelock on October 07, 2009 at 05:11:04 from (67.59.45.73):
My H had been idling up and down by itself so I did some checking and the bracket that holds the carb float is egged shaped were the pin goes threw. I rebuilt the carb years ago but that bracket doesnt come in the kit. Looking to buy just the bracket or a used carb if someone know where I can get one. Also I've been wondering if my volt reg. is bad. Seems like my battery will stay charged for months until I use my lights after dark, then It drains the batt. and next time I try to start it the batt is dead. What a easy way to check it, w/ volt meter? Also someone told me an easy way to check to see if generater is charging is to pull the batt cable and see if it dies??? Is he right?? Thanks Ryan PS Love to see everyones photos out in the fields this time of year. I'm gonna get me a camera so I can post my own pics.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tuning-Up Your Tractor: Plugs & Compression Testing - by Curtis Von Fange. The engine seems to run rough. In the exhaust you can hear an occasion 'poofing' sound like somethings not firing on all cylinders. Under loaded conditions the tractor seems to lack power and it belches black smoke out of the exhaust. For some reason it just doesn't want to start up without cranking and cranking the starter. All these conditions can be signals that your unit is in need of a tune up. Ok, so what is involved in a tune up? You say, swap plugs and file the points....now tha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
