Posted by AndrewFromNS on December 21, 2009 at 22:23:08 from (71.7.194.23):
In Reply to: What type of wire? posted by KenB_Texas on December 21, 2009 at 22:15:12:
I dont have my book handy, so im not sure what SO and THHN are off the top of my head. I like to think im electronically inclined, tho I have only rewired one antique tractor, I've built a couple model railroads, installed fog lights, etc on cars, and done a few competition subwoofer installs.
For anything like what your about to do, I personally go for the rolls of wire from the auto store or similar. Roughly 20 to 25 feet in length, in a variety of gauges and colours. If your only going to do this once, your only going to need a couple spools, more if you want to colour code, or get complex with lights, etc. If you have a dozen tractors to rewire, look into buying that same wire on spools. I know my local NAPA, and a buddies shop locally, can supply me with wire on spools ranging from ten feet to five hundred feet. Where I tend to do this sorta thing semi-frequently, I've learned that buying wire in 100-foot rolls is cheaper, but it doesn't make much sense for you, if your only going to use 15-feet and have the rest sat in the shop.
To make a long answer a bit longer...I dont think that wire type matters, so long as its a suitable gauge (If you have Bob's great diagrams, the gauges needed are listed) and is stranded copper (solid copper is suitable, too, just avoid anything else).
Cheers, and I hope this was of some assistance!
AR
This post was edited by AndrewFromNS at 22:24:22 12/21/09.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
