44' M stepped pistons

Posted by oldiron29 on January 07, 2010 at 15:28:29 from (69.112.212.24):

Hi Guys, I posted this on pulling form But thought I would also ask here. I have pulled down a stuck 1944 farmall M serial# 80993. The head was trash so I found a recent rebuilt #8060 head. It has longer valves around 6" mabe a little less, the head I had was 5 9/16 valves. I am looking at yesterdays sleeve and piston kit by Tisco Part #BIFH1155A witch is for early M with stepped pistons. Will I have problems with this head or with pistons hitting valves? Or should I stick to flat top pistons? Thanks For any help before I order
Oldiron29

Replies:

• Re: 44' M stepped pistons Too Far Gone 07:41:19 01/08/10 (0)
• Re: 44' M stepped pistons randy hall 17:35:34 01/07/10 (1)
  • Re: 44' M stepped pistons oldiron29 17:43:43 01/07/10 (0)
• Re: 44' M stepped pistons Andrew Z 16:20:36 01/07/10 (5)
  • Re: 44' M stepped pistons oldiron29 17:07:59 01/07/10 (0)
  • Re: 44' M stepped pistons oldiron29 16:42:49 01/07/10 (3)
    • Re: 44' M stepped pistons Andrew Z 17:05:14 01/07/10 (2)
      • Re: 44' M stepped pistons oldiron29 17:11:18 01/07/10 (1)
        • Re: 44' M stepped pistons Andrew Z 17:18:06 01/07/10 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]