Re: farmall a plows

Posted by gene bender on September 28, 2010 at 13:22:30 from (67.55.227.196):

In Reply to: farmall a plows posted by Todd Heck on September 28, 2010 at 13:07:07:

There are lots of parts for the A=192 rockshaft that goes between the fenders and two levers one to raise and lower unless its an exhaust lift model and the other lever sets the depth. It mounts on the bell housing by the starter. The SA plow would have a chain to hook to the list arms. and the drawbar is reversed and used the rockshaft to srt depth. The one for the A has a longer beam that hooks to a wishbone assy that bolts to the tront steering sector.Does either plow have a piece of round bar mounted on the beam at the rear give a better description of what you have not uncommon to be short parts when buying one of these plows.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]