Re: h head question

Posted by The Red on July 04, 2000 at 04:59:30 from (12.75.196.19):

In Reply to: h head question posted by bill dorrance on July 03, 2000 at 20:33:08:

If I am interpreting correctly, you need the cylinder head breather tube (ref 24)(51206DAX) with connectors (Ref 25, 29, 30) on each end. You will see two threaded holes in the head, with one at each end just inside the raised lip of the head where the valve cover and gasket bolt down. The tube itself looks like a wide U with the vertical portion around 4 inches on each end and the horizontal length is around 16 inches or so. The tube has a slight angle to it and can only be installed in one direction. Sure wish I had a scanner! $23 doesn't sound that bad. You might beable to get a used one from Gary Biewer at 218-937-5627.

Follow Ups:

• Re: Re: h head question jakee 19:41:29 07/04/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: h head question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]