Posted by Faster346 on February 18, 2011 at 21:16:25 from (72.241.213.69):
The tank on my Super C was very rusty, so I went to Harbor Freight and picked up a gallon of a product called Evaporust. I poured it in last night. Directions said to pour it into or soak rusted surface anywhere from a hour to over night depending on rust, then flush with water and let air dry. I let it sit over night because my tank was pretty bad. Well I drained it out tonight, and it got about 95% of the rust out of the tank, and it looks good..the only problem I have is the tank is now lined with a green algea looking residue from the Evaporust, which is a green water based liquid. As soon as I drained it, I flushed it with hot water about 5-7 times, and it didn't come out. I stuck a long screwdriver down the filler hole and scraped the bottom of the tank, and it came lose, so it must be some sort of film like residue on there..not sure how to go about this now?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
