Re: Re: IH 350 UTILITY

Posted by Les Repair on July 18, 2000 at 17:31:50 from (206.28.174.179):

In Reply to: Re: IH 350 UTILITY posted by Don H. on July 18, 2000 at 15:35:46:

If your plow doesn't have a gauge wheel, you control the depth with a stop on the lift cylinder. When your tractor was new, there was a rod on the cylinder which could be moved up or down to control the depth of the cylinder. Most of these were broken off. You can get a clamp style depth stop from a Farmall 300 fast hitch application.

Follow Ups:

• Re: Re: Re: IH 350 UTILITY MARVIN(MN) 22:55:01 07/18/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: IH 350 UTILITY Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]