Re: Super A Engine Rebuild

Posted by El Toro on March 08, 2011 at 05:47:15 from (108.3.200.96):

In Reply to: Super A Engine Rebuild posted by Goodman on March 07, 2011 at 12:16:27:

You can buy a sleeve kit off this forum for around $350.00. I would not just patch the engine. You probably should have the crankshaft measured for wear at your local auto machine shop. Buy your new bearings from the same machine shop. Some of the Super A's used casting block number 354898R1. You need to measure the length of the sleeves and the diameter at the seal to determine which sleeve kit to buy. Some used sleeves that measured 6-7/8" long and some were 7-1/16" long used with the 354898R1 block. This block would also accept an 3-1/4" over bore kit.
Hal

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]