Super C Carb

Posted by Dave on July 20, 2000 at 11:18:12 from (169.207.115.179):

I have a Super C with a UT771SB Carb. Could someone give me the float level setting for this carb., as measured with the carb upside down, from the float bottom ( that would now be up ) to the machined cast flange of the carb upper half. I have a book that says 1 13/32", but it looks to me that it should be closer to 1 1/4". My book also says the carb should be a UTT771SA, does anyone know the difference?
Also, is there a carb that would give a little more power out of my Super C, especially if I go with oversized bore on a rebuild? This carb has only a 3/4" throat. Thanks

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Super C Carb Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]