Posted by Wardner on April 17, 2011 at 08:43:16 from (209.86.226.58):
In Reply to: Electrall Generator posted by Maine Fordson on April 16, 2011 at 23:13:23:
Maine Fordson,
I may have made an error on one of my earliest Electrall threads. The 560 and 660 will not accept the side mount. The generator will certainly bolt up but the Electrall gearbox doesn't have the right set of gears. The gearbox drives off the top side of the IPTO driving gear. It is smaller to compensate for the six cylinder's higher speed.
Seeing that the Electrall did not sell well, IH did not bother to make a set of gears to mesh with the later IPTO driving gears. One could substitute those gears but would have an IPTO that turns too fast. Probably on the order of 610 RPM. I haven't bothered to look up the tooth counts.
The hardest Electrall part to find is the sidemount gearbox. You need to locate that before you have good value on the generator. Get the bracket too but that can be found on a trailer unit.
Lehman sales offered exactly what you have three times on eBay. They listed it as a reserve auction and it didn't sell with a $325 offer. Two Buy-it-Now auctions at $800 didn't work either. If it was a complete unit, I think it might have sold for $3000 plus.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
