Posted by seth harder on April 25, 2011 at 08:16:54 from (173.224.21.177):
Hello, got a question, We have a 41 H that we restored, we used the factory pistons,New rings, 1 sleeve, had the head completley rebuilt, with valves, guides, springs, tubes you name it. We rebuilt the oil pump and have tremendous oil pressure. 75 pounds, cold, 65 hot. Our problem is that it smokes tremendously, but it has very good compression and pulls right at factory horsepower on the dyno. the middle cylinders are wettest with oil running down 3 upon inspection. We even went as far as a whole different head, head gasket, and valve train, Nothing, it still smokes. We are rebuilders and restorers, so this isnt the first trip to the rodeo. Is the high oil pressure pushing oil past the sleeve and into the cylinder? HELP!! and thanks.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.