Farmall & IHC Tractors Discussion Board |
Re: Re: Farmall H oil level
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by mike hoppy on July 29, 2000 at 18:11:27 from (205.188.195.41):
In Reply to: Re: Farmall H oil level posted by TomH on July 29, 2000 at 17:19:07:
greg the oil capacity of all h tractors is 6 qts the 2 pitcocks on the right side of oil pan is as follows when you change oil you open the upper mos t cock and fill when oil drips or comes out this is the proper fill level the lower cock is as long as you get oil to drip out or come out of it it`s at the proper operating level and you need to use a low ash 30 weight oil if you have a case dealer or tractor supply around they have the oil and manuels on this type of tractor thanks mike
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|