Posted by dmiller on May 05, 2011 at 07:59:38 from (97.121.231.87):
Have an 806 wheatland. Going to an auction on Sat. Trying to decide which of the pieces would be just right or too big. Mostly sand loam soils around here. Not currently grain farming but hope to get into it as soon as I have can find a field to rent. 1. a 12 foot "tool bar". pull type field cultivator. http://www.rickyoungauctioneers.com/detail.cfm?item=14085
2. a Krause field cultivator not sure the size but looks like maybe a 16 foot. http://www.rickyoungauctioneers.com/detail.cfm?item=14081 I'm thinking this one would be too big.
3. 14' roller/packer http://www.rickyoungauctioneers.com/detail.cfm?item=14078 Currently I have a 10 foot drill and 10 foot disc. Thinking I should try to find a 10 foot packer so they will all go together better??
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
