Re: IH Model R carburetor

Posted by justin on July 31, 2000 at 17:33:58 from (216.161.98.198):

In Reply to: IH Model R carburetor posted by Danny on July 31, 2000 at 17:26:05:

Well, it could be many problems.. The float level could be too high, allowing fuel pour in over when it should be stopped.. There could be a burr or obstruction on the float pivot pin causing the float to catch in a certain spot,thus making the valve not close, or with todays gas, the old cork floats sometimes deteriorate, so a new brass float may also be needed... If you plan on doing a rebuild, make sure you replace the float with a brass one..

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IH Model R carburetor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]