Posted by Harold H on June 07, 2011 at 21:20:27 from (12.23.230.162):
In Reply to: Please school me posted by Pat-CT on June 07, 2011 at 18:13:00:
Pat,
The B275 was the first IHC built utility tractor which was imported in 59, 60, and 61. it was followed by the B414 which continued the same basic design and most components in 62, 63, 64, 65, and a few in 66, and 67. In 1965 IH begain producing the American made I424 in Louisville which continued the same design using some British and some American parts for 65, 66, and 67 and then in 68 the final version of this same basic tractor made in America was the I444 in 68, 69, 70, and 71. Certain models of the same basic tractor are still being built today by Mahandra in India. A large portion of the parts for the B275, B414, I424, and I444 will interchange so parts are not a problem. (If your parts source can't find a listing for B275 or B414 check parts for I424 or I444). In Nebraska test 733 the B275D had 144 cu in, 30.76 dbhp, and 32.88 ptohp. The B414D increased the cubic inches to 154 by increasing the bore from 3 3/8 to 3 1/2 inches which increased the Nebraska test #827 to 32.57 dbhp and the pto hp to 35.99. The I424D also has 154 cu in but tested Nebraska test #911 32.87 dbhp and 36.91 ptohp. The I444D did not receive a new Nebraska test and retained the 424 hp ratings.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
