biggerred said: (quoted from post at 12:04:03 08/14/11) Old 400 Im working on had a busted head that let water in a couple of cylinders. Tractor sat for a long while and pitted #4 sleeve pretty good, but the rest are good without even a ring grove. I had it running and had no smoke at all, but I've pulled the head after finding water in the pan. Ever just pulled out one sleeve? I can only find sleeves in sets of 4, but truly there is no need for a complete rebuild. I just don't want the pitting to eat the rings before their time. What do ya think?
You can buy a single sleeve and piston set, I can help you out if you let me know if it has stock bore 4" or overbore 4.125" pistons, and if they are the 4.125", are they flat top or domed pistons.
Edit I missread your post the first time, You can aslo buy just one sleeve a set of rings for one cylidner, but honestly it is cheaper to buy the "liner kit" for one Cylinder, with sleeve, piston, rings, and wrist pin.It's $20-$30 cheaper in most cases to buy the "liner kit" then to buy the sleeve and rings seperate.
This post was edited by ih560 at 10:05:51 08/14/11.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
