560 Farmall Power Steering

Posted by big a on October 03, 2011 at 17:54:27 from (166.181.2.39):

Been going through a 560 that been setting for about ten years. Got almost everything fixed, but steering is hard both directions. Checked pressure, and have about 900psi full left, and maybe 1-200 at full right.I am thinking that staked nut may have come loose up in the valve in the front bolster. I know pressure is a bit low, but it should be equal both ways, right?

Jacked the front end up, and it turns easily with no binding, so I'm pretty sure I have a hydraulic problem.

Been almost 20 years since I last had one of the steer valves apart...anything to remember? Any other diagnostic thoughts?

Replies:

• Re: 560 Farmall Power Steering big a 07:48:02 10/04/11 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]