Posted by IH fan on November 01, 2011 at 12:56:37 from (108.73.25.85):
In Reply to: farmall m power steering posted by Crazy Red Power in SE-WI on October 30, 2011 at 21:36:24:
Quoting Removed, click Modern View to see
I believe the valving on a CharLynn torque generator is open centered, so the priority flow (2- 2.5gpm) tapped off for the PS is always flowing through the open center when you are not turning. There are different models of the torque generator, so maybe all are not that way. These are built at Eaton's Shawnee plant, so am not familiar with the later versions other than to see them in the Eaton catalog. I'm pretty sure mine has flow through it any time the engine is running, whether i'm turning or not... guess I could unhook the return line and find out, but seems like a messy job to me.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
